Mach I® Hardwood Flooring by Robbins Sports Floor Systems

  • Robbins “Bio-Cradle®” technology is the heart of the Mach l Hardwood Flooring Design—unique, patented innovation accelerates the installation of the subfloor by up to 50% and provides the owner a high-performance, shock absorbing floor system in less time.
  • Prefabricated sub-floor panels remove the potential for error in jobsite-assembled alternatives.
  • Bio-Cradle assembly uses less material to manufacture, making you a good steward of our natural resources.

Mach-1® Classic

Mach-1® Classic

  1. Flooring – Robbins 25/32″(20mm) Continuous Strip® XL Finger-Jointed(FJ), MFMA Northern Hard Maple Strip Flooring
  2. Flooring Fastener – 2″(51mm) staples or cleats
  3. Anchor – anchor spike with anti-squeak sleeve
  4. Subfloor – Factory assembled and drilled Bio-Cradle subfloor
  5. Resilient Pad – 7/16″ Bio-Pad
  6. Vapor Retarder – 6-mil polyethylene film

System Benefits:

  • Anchored-resilient performance for long term dimensional stability
  • Factory assembled components for fast installation and quality control
  • Superior performance
  • Utilizes the strength of Continuous XL maple

System Height:

  • 2 1/8″(54mm) with 25/32″(20mm) thick Flooring
  • 2 3/8″(60mm) with 33/32″(26mm) thick Flooring

Mach-1® FD

Mach-1® FD

  1. Finish – MFMA approved floor finish
  2. Gamelines – Gamline Paint
  3. Sealer – MFMA approved floor sealer
  4. Flooring- Robbins 25/32″(20mm) thick Continuous Strip® XL Finger-Jointed Northern Hard Strip Maple
  5. Flooring fastener – 2″ staples or flooring cleats
  6. Subfloor- Factory assembled ‘FD Bio-Cradle subfloor’ system
  7. Resilient Pad – 3/8″ Bio-Sport Pad
  8. Vapor Barrier – 6-MIL polyethylene

System Benefits:

  • Factory assembled components for fast installation and quality control
  • Floating system for economic price point.
  • Patented Bio-Cradle subfloor assembly incorporates low-profile, wide-body components, for unsurpassed stability.
  • Special construction Bio-Cradle subfloor is fully supported by Robbins exclusive 3/8″ Bio Sport pad for consistent shock absorption.
  • Continuous Strip® XL Maple adds strength and provides a floor that can last up to 10 years longer than random-length strip.
  • Can be modified for added resilience.

System Height:

  • 2 1/8″(54mm) with 25/32″(20mm) thick Flooring
  • 2 3/8″(60) with 33/32″(26mm) thick Flooring

Mach-1® HL

Mach-1® HL

  1. Finish – MFMA approved Finish
  2. Gamelines – Compatible Gameline Paint
  3. Sealer – MFMA approved Sealer
  4. Flooring – Robbins 25/32″(20mm) Continuous Strip® XL Finger-Jointed(FJ), MFMA Northern Hard Maple Strip Flooring
  5. Flooring Fastener – 2″(51mm) staples or cleats
  6. Subfloor – 1 layer of nominal 7/16″ or 15/32″ x 48″ x 96″, exposure 1, structural rated sheathing
  7. Anchor – anchor spike with anti-squeak sleeve
  8. Subfloor – Factory assembled and drilled Bio-Cradle subfloor
  9. Resilient Pad – 7/16″ Bio-Pad
  10. Vapor Retarder – 6-mil polyethylene film

System Benefits:

  • Anchored for superior game play and dimensional stability over time.
  • High rolling load ability
  • Very Uniform in performance

System Height:

  • 2 5/8″(67mm) with 25/32″(20mm) thick Flooring
  • 2 7/8″(73mm) with 33/32″(26mm) thick Flooring

Mach-1 CS

Mach-1 CS

  1. Finish – MFMA approved floor finish
  2. Gamelines – Gamline Paint
  3. Sealer – MFMA approved floor sealer
  4. Flooring- Robbins 25/32″(20mm) thick Continuous Strip® XL Finger-Jointed Northern Hard Strip Maple
  5. Flooring fastener – 2″ staples or flooring cleats
  6. Subfloor- Factory assembled Bio-Cradle CS subfloor system
  7. Resilient Pad – 3/8″ Bio-Sport Pad
  8. Vapor Barrier – 6-MIL polyethylene

System Benefits:

  • Design specifically for Health Clubs
  • Quick and easy installation

System Height:

  • 2 1/8″(54mm) with 25/32″(20mm) thick Flooring
  • 2 3/8″(60mm) with 33/32″(26mm) thick Flooring